Filter
Top Products
SC827 Chassis Manual
5-2
5-2 Chassis Cover
Before operating the SC827 chassis for the rst time, it is important to remove the
protective lm covering the top of the chassis, in order to allow for proper ventila-
tion and cooling.
Removing the Chassis Cover and Protective Film
Remove the two screws which secure the top cover onto the chassis as 1.
shown above.
Lift the top cover up and off the chassis.2.
Peel off the protective lm covering the top cover and the top of the chassis3.
Check that all ventilation openings on the top cover and the top of the chassis 4.
are clear and unobstructed.
Warning: Except for short periods of time, do NOT operate the
server without the cover in place. The chassis cover must be in
place to allow proper airow and prevent overheating.
Figure 5-1: Removing the Chassis Cover
Remove two
screws
Check Ventilation
Openings
!
2
1
3
1
4
1