Filter
Top Products
TANDBERG Videoconferencing System
67
Advanced use
VGA Settings
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1&3 will
be disabled.
Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video outputs 2&4 will
be disabled.
Loop: ‘VGA Out’ will display whatever is present on ‘VGA In’. All video outputs will be enabled. The
VGA monitor will act as a third monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the
codec.
IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE
YOU
HAVE A VGA-MONITOR CONNECTED TO THE
VGA-OUTPUT ON THE SYSTEM. IF YOU NOT HAVE
A
VGA-MONITOR CONNECTED, YOU WILL NOT BE
ABLE TO SEE THE MENU SYSTEM!
NOTE
ICIF WILL NOT BE AVAILABLE WHEN VGA OUT IS
MAIN OR DUAL.
NOTE