Filter
Top Products
TANDBERG Videoconferencing System
91
Advanced use
Dataport configuration
The system provides two standard RS 232 serial ports to allow a computer to be connected for data transfer and
control purposes.
WHEN CONNECTING TO A PC THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH RS232 CABLE.
Dataport 1
If you wish to connect a PC to Dataport 1, you must ensure that the PC and the system are identically
configured. The available settings are:
Dataport 1 supports 4 different modes:
Data mode
Provides a transparent data channel. This channel can be used
for many different purposes such as file transfer, application
sharing and more. When using this mode, it is necessary to
have a TANDBERG system at the far end.
Control mode
The control interface provided by the Dataport supports a subset
of the Hayes command set as well as a comprehensive set of
system specific commands.
This mode maintains communication with the Dataport’s
command interpreter at all times. All features available from the
hand-held remote control can be accessed through the dataport.
This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a profile, this
prefix can be automatically added to the number being dialed.
EXAMPLE:
0 IS ADDED AS A CALL PREFIX TO THE 2ND PROFILE, ISDN. IF YOU ENTER 12345678 IN THE DIAL MENU AND SELECT ‘ISDN’, THE NUMBER
DIALED WILL BE 012345678.
Using the three last profiles you can enter the name of a profile, prefix and network selection. This is useful if you
have a fixed prefix for your service provider.
TIP
NOTE