Filter
Top Products
1 – Introduction
TASCAM CC-222MKIV 13
2 – Features of the CC-222@%^
Display
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
1
˙/¥ (Tape-running indicator) Shows the direction of a
tape during playback or recording.
2
Tape PAUSE (π) Lights when the unit is in standby
mode for tape playback or recording.
3
Tape PLAY Lights when a tape is being played back or
recording.
4
Tape REC Lights during tape recording or recording
standby mode.
5
Tape Counter display The tape counter value is incre-
mented when the tape is moving from left to right, and
decremented when it moves from right to left (See “Tape
counter” on page 33 for more details).
6
Character display Disc or track information, menu,
message, time, and operation status are displayed.
7
Tape Level meter Displays the playback level and the
input level of the source device for recording operation.
8
TAPE, CD In the CD-TAPE CONT PLAY mode (con-
tinuous CD/tape playback), on of these will flash during
playback.
9
Counter display Either TOTAL or REMAIN is lit. When
both indictors are off, the time mode is set to show the
elapsed time of the current track.
0
Disc information display NO TOC Lights when a disc
does not contain TOC (Table of Contents) data.
CD,
CD-R or CD-RW lights up when a disc with TOC data
is loaded.
q
CD PLAY (¥) Lights during disc playback.
w
CD REC Lights during disc recording or recording
standby mode.
e
SYNC Lights when the SYNC recording mode is on.
r
REPEAT, A-B display When the Repeat function is
on, “
REPEAT” is lit. When the A-B Repeat function is
on, “
REPEAT” and “AB” are lit. “AB” also blinks until a
“B-point” is entered.
t
INPUT 2 This is always displayed except when record-
ing with the
PHONO key.
y
LINE 2, DISC display Shows the different sources
available for
INPUT 2 (Tape deck).
LINE 2: a signal source is connected to LINE INPUT 2.
DISC: a signal source is connected to internal CD drive.
u
DUB 1, 2 When dubbing a tape to a CD-RW, the indica-
tor “
DUB 1” lights up. When dubbing a CD-RW to a tape,
indicator “
DUB 2” lights up.
i
INPUT 1 This is always displayed except when record-
ing with the
PHONO key.
o
OPTICAL, COAXIAL, LINE 1, PHONO, TAPE display
Shows the different sources available for INPUT 1 (CD
drive).
OPTICAL: Input source is connected to OPTICAL.
COAXIAL: Input source is connected to COAXIAL.
LINE 1: Input source is connected to LINE 1.
PHONO: Input source is connected to PHONO.
TAPE: Input source is connected to internal tape deck.
p
A·TRACK Lights when the Auto Track function is on.
The indicator blinks when Time mode is selected.
a
A·SPACE Lights when the Auto Space function is on.
s
CD PAUSE (π) Lights during playback or recording
standby mode.
d
SINGLE, RANDOM, PROGRAM display Depending
on the playback mode selected. When all the indicators
are off, Continuous playback mode is on.
f
CD Level meter Displays the playback or input source
level when recording.
g
MUSIC CALENDER Available tracks for playback light
up; played back tracks disappear from the screen. When
there are more than 20 tracks available for playback, the
“
OVER” indicator lights up.