1 – Introduction
14 TASCAM CC-222MKIV
2 – Features of the CC-222@%^
every track on a disc to be played.
e
Number keys (0 through 10, +10, and CLEAR key)
Use number keys to enter track numbers for disc playback.
The
CLEAR key cancels the last track entered.
r
SEARCH Ô/ keys Used for “fast forward” and
“fast reverse” through a disc.
t
CD SKIP Â/¯ keys Used to select tracks or menu
parameter values.
y
CD REC key Places the disc in record standby mode and
performs manual track incrementing while recording.
u
SYNC REC key Turns synchronized recording of the
disc recorder on and off.
i
Tape REC key When stopped, pressing this key enters
recording standby mode.
o
Tape REC MUTE key When recording to cassette and
this key is pressed, the sound is muted for about four
seconds, and the unit enters record standby mode.
p
Tape PLAY¥ key Starts tape playback or recording,
from left to right.
a
Tape ˙PLAY key Starts tape playback or recording,
from right to left.
s
Disc OPEN/CLOSE key Opens and closes the disc tray.
d
A-B key Use this key to set the start and end points of a
repeat loop and to cancel such a loop.
f
REPEAT key Sets the repeat mode (single track, or disc
repeat playback) on and off.
g
FADER key Use this key to perform automated fade-
in and fade-out when recording to disc. The time is set
using menu items.
h
ERASE key Used when erasing data from CD-RW discs.
j
FINALIZE key Used when finalizing recordable discs.
k
CD REC MUTE key During disc recording, pressing
this key inserts a silence of about four seconds and paus-
es recording.
l
CD PLAY key Starts CD playback or recording (from
record standby mode).
;
CD PAUSE key Pauses or resumes CD playback or
recording (starts recording from record pause mode).
z
CD STOP key Stops CD playback or disc recording.
RC-222MKIV Remote control unit
1 Tape RESET key Resets the tape counter to zero.
2
Tape RTZ key Returns the tape to the zero position.
3
Tape PAUSE key Stands by for tape playback or record-
ing. Pressing this key again resumes the operation.
4
Tape ∆/˚ key Fast-rewinds or fast-forwards the
tape.
5
Tape STOP key Stops the current tape transport operation.
6
CONT PLAY key Use this key to turn continuous play-
back (alternating between disc and cassette) on and off.
7
PLAY MODE key Allows the selection of either con-
tinuos, single, programmed or random playback.
8
AUTO SPACE key Automatically adds a space of about
four seconds between disc tracks on playback.
9
DISPLAY key Changes the time display for the disc
recording and playback.
0
MENU key Repeated presses of this key shows different
menu items.
q
ENTER key Used to confirm menu settings.
w
INTRO CHECK key Allows the first 10 seconds of