TASCAM CC-222MKIV 15
The following are the menu items that can be set using the
MENU key. The majority of them affect disc recording.
Pressing the
MENU key repeatedly cycles through the
menu items. Not every menu item is available in every
situation (for instance, if a digital input is not selected, the
digital direct option is not shown).
1 PresstheMENUkeyuntilthedesiredmenuisshown
onthedisplay.
2 TurntheMULTI DIALtochangeavalueorsetting.
3 Push the MULTI DIALtoconrmthechangeandexit
themenuitem.
Alternatively,keeppressingtheMENUkeyuntilthe
normaltimecounterisdisplayed.
Menu operation
Menu displayed
Meaning
Default (factory) value Described in:
CD PITCH Pitch control setting ON/OFF OFF “Pitch control playback” on page 19
PITCH CD pitch control setting 0.0% “Pitch control playback” on page 19
CD KEY Key control setting ON/OFF OFF “Key control playback” on page 19
KEY LEVEL CD key control setting 0 “Key control playback” on page 19
SRC Sampling rate converter ON “Sampling Frequency conversion” on page 21
VOLUME Digital volume control 0dB “Signal volume” on page 21
A_TRK Automatic track increment LEVEL “Automatic track division” on page 26
A_TIME Automatic track increment 1 min “Automatic track division” on page 26
S_LVL Sound (trigger) level for track increment –24 dB (analog) “Setting the trigger level” on page 25 and
–54 dB (digital) “Using the trigger level” on page 25
COPY ID Copy-protection on recorded discs 1 GEN “Copy-protection” on page 27
FADE IN Allows fade in of recorded discs 3s “Fade-in and fade-out” on page 27
FADE OUT Allows fade out of recorded discs 3s “Fade-in and fade-out” on page 27
DUB>VOL Bypasses (THRU) or enables (ON) THRU “Dubbing tapes from the CD deck” on
internal volume when dubbing from page 31 and “Dubbing from tape to disc”
tape to disc or disc to tape on page 24
PHONO Sends the PHONO inputs to DISC or DISC “Recording tapes from the PHONO deck”
TAPE on page 32 and “Recording to disc from
the RIAA PHONO inputs” on page 23
MP3 DIR MP3 directory OFF “Playing back MP3 files” on page 20
OUT2 Assign the OUTPUTS2 jacks to TAPE TAPE “OUT2 setting” on page 33
or DISC
Menu configuration
3 – Menu operation