Tascam DR-05 VCR User Manual


 
16
TASCAM DR-05
16
TASCAM DR-05
Message
The following is a list of the pop-up messages that might appear on the DR-05 under certain
conditions.
Refer to this list if one of these pop-up messages appears and you want to check the meaning or
determine a proper response.
Message Meaning and response
File Name ERR
The DIVIDE function would cause the file name to exceed 200 characters.
The DIVIDE function adds "_a” or “_b” to the end of the file name. Before
choosing the DIVIDE function, connect the unit to a computer and edit
the file name to less than 198 characters.
Dup File Name
The DIVIDE function would cause the file name to be the same as that of
an existing file in the same folder. The DIVIDE function adds "_a” or “_b” to
the end of the file name. Before choosing the DIVIDE function, connect
the unit to a computer and edit the file name.
File Not Found
The file added to the playlist cannot be found or a file could be
damaged. Please check that file.
Non-Supported
The audio file is not a supported format. Please see "10 – Connecting
with a Computer" in the Reference Manual for file formats that this unit
can use.
Battery Empty The batteries are almost out of power. Replace the batteries.
I/O Too Short
The IN and OUT points are too close together. Set them with at least 1
second between them.
File Not Found
PLAYLIST
A file in the Playlist cannot be found. Please confirm that the file is still in
the Music folder.
No PLAYLIST
No files have been added to the Playlist. Add a file to the Playlist or
change the play mode to something besides PLAYLIST.
PLAYLIST Full The playlist is full. You cannot add more than 99 tracks to the Playlist.
MBR Error Init CARD
The card is not formatted properly or the formatting is broken. Change
the card or press the 7 button while this message is being shown to
format the card.
Formatting will erase all the data on the card.
Format Error
Format CARD
The card is not formatted properly or the card might be broken. This
message also appears if the card was formatted using a computer
connected by USB and if an unformatted card is inserted in the unit.
Always use the DR-05 to format cards to be used with it. Change the card
or press the 7 button while this message is being shown to format the
card.
Formatting will erase all the data on the card.
File Not Found
Make Sys File
The system file is missing. This unit requires a system file for operation.
When this message appears, press the 7 button to automatically create
a system file.
Message Meaning and response
Invalid SysFile
Make Sys File
The system file required to operate this unit is invalid. When this message
appears, press the 7 button to automatically create a new system file.
Invalid Card
Change Card
Something might be wrong with the card. Change the card.
Write Timeout
Writing to the card timed out.
Backup files on the card to a computer, and format the card.
Card Full
The card has no remaining capacity. Erase unnecessary files or move
them to a computer to make open space.
Can't Divide
The selected division point is not suitable. (It is too close to the
beginning or end of the track.)
Max File Size
The file is larger than the designated size, or the recording time exceeded
24 hours.
File Full
The total number of folders and files exceeds 5000. Erase unnecessary
folders and files or move them to a computer.
Card Error The card could not be recognized properly. Change the card.
File Protected The file is read only and cannot be erased.
No Card No card is in the unit, so recording is not possible.
No PB File There is no file that can be played back. The file might be damaged.
No MUSIC File There is no playback file, so DIVIDE cannot be executed.
If any other error occurs, turn the unit off and restart it.