Filter
Top Products
38 TASCAM DR-07
4–Screen Overview
show the current setting value (the factory
setting is “
X8
”) highlighted in inverse.
4 Turn the wheel to select the desired setting.
The setting is changed immediately, so there
is no need to press the ¥/π key again to
confirm it.
5 Press STOP/HOME to return to the Home
Screen.
NOTE
When the • ¶ icon appears in the lower right
part of the screen, as shown in the preceding
image, there is additional information for the
current screen below what is shown on the
display.
When the • § icon appears, there is additional
information for the current screen above
what is shown on the display.
You can also use the • ≤ key instead of the
¥/π key in these steps.
When the • § icon appears to the right of a
setting value, you can change that value by
turning the wheel to the right. When the ¶
icon appears to the right of a setting value,
you can change that value by turning the
wheel to the left.