Filter
Top Products
16
PLAYING A CD AUDIO DISC
Load the disc•
After a short delay while the disc reads, the disc will start
to play from track 1. The track and elapsed time will be
displayed on the front panel and the TV will show the CD
playback status display.
PLAYBACK CONTROL
When a CD is playing.
Play/pause:
Press the • /, button.
PAUSE will be displayed on the TV screen status display.
Press the • /, button to resume play.
Navigating tracks:
Press the • } or { button to jump forward or backward
through the tracks.
NOTE: Pressing the { button for the rst time will return
play to the start of the current track.
Jumping to a particular track:
Press one of the number keys on the • NUMERIC
KEYPAD to jump directly to a track number.
To enter a two digit track number, press the two •
number buttons (for example 1 then 2 to select track
12).
The player will jump directly to the track you selected.
Fast search
Press the • ] or [ button to fast-search forward
or backward through a disc. Pressing the button
repeatedly will increase search speed in the range -
2X " 4X " 8X " 16X " 32X " 64X " 128X "
Normal
The search speed is displayed on the TV screen
Press the • /, button to return to normal speed play.
Stopping the disc
Press the • . button (also available on the front panel)
to stop the disc.
NOTE: In systems where the player is used for audio
playback of CDs through an audio Surround Decoder
or amplier, a basic CD playback display is available on
the unit (the TV display is not required for track/time
navigation). To set advanced play modes such as Repeat,
it will be necessary to use the TV display to determine the
status of the player.
Repeat/random play:
There are three repeat/random modes.
Press the • REPEAT button repeatedly to step through
the three repeat modes.
The repeat mode selected will be displayed on the TV
screen.
Repeat All: The player will repeat all tracks on the disc
continuously.
Repeat All + Random: The player will repeat all tracks on
the disc continuously, but in a random sequence.
Repeat track: The player will repeat the track currently
playing.
Repeat A-B:
You can also set the player to repeat a particular passage
from the disc. This can include one or more tracks.
Press the • A-B button to mark the start of the section
you want to repeat.
The indication ‘A-’ will appear under the repeat symbol on
the status display.
When you reach the end of the section you want to •
repeat, press the A-B button again.
The indication ‘A-B’ will appear under the repeat symbol on
the status display.
The player will now continuously repeat the section
between the start and end markers.
Press the • A-B button again to clear an A-B repeat
section.
Track
playing
Total
tracks
Elapsed
time
Track
time
Repeat
status
Shue
status
Play
status
Elapsed time
bargraph