Filter
Top Products
TechniSat EC 4004
18
MEM
> Press
•
and enter "02".
MEM
> press
•
for a second time or wait approx. 4 seconds, and ARD is memorized on channel 2.
> As long as the memory display is on screen you can interrupt the process by
> pressing other keys, for example the channel selection keys.
MEM
Warning: If you do not enter a number after pressing
•
, the channel remains in the old posi-
tion (in our example: 01).
Since channel 2 in the user table is now overwritten by channel 1,you must copy ZDF from table 1.
SAT
> press quickly followed
> by .
> select ZDF with "02"
DEL
> and memorize this by pressing
•
and by entering "01".
Now you have stored ZDF to channel 1 of the user table.
5.2.2 Deleting
You can only delete channels in the user table!
> select the undesired channel and
DEL
> press the recessed
•
key using a ball point pen.
Now the channel position is deleted and is skipped when switching the channel selection keys.
If you directly enter the channel number,the respective channel is taken from the most recent-
ly selected preprogrammed table.
SAT
DEL
> to delete the entire user table, press , ,
•
shortly one after another.
Consequently, the channel selection keys are ineffective.
*EC 4004 ENGL. 14.12.1999 9:59 Uhr Seite 18