Filter
Top Products
3. Connection
3.1 Outdoor unit and television set
a) Connect the receiver with the LNB of the outdoor equipment using a special coax cable (TechniSat Coax-
Sat 2050).
b) If available, connect the ferrite polarizer to the polarizer terminal clips.To fasten the cables you may want to
remove the polarizer plug from the receiver.
c) Connect the receiver to a socket of 230 V/50 Hz.When the LNB input is short-circuited, the receiver switches
off the LNB supply voltage and displays a blinking danger signal "Sh-C" (short
circuit). Unplug the connector and eliminate the short circuit.
d) Use a SCART cable to connect the receiver (SCART input "TV") with the television set (SCART input). If your
television set does not automatically switch to AV (audio/video) operation, you have to switch manually.
When receiving D or D2 MAC channels the receiver also supplies a so-called RGB signal. If your TV set has corre-
sponding inputs, it automatically switches to RGB operation when the RGB/FBAS switch is in "RGB" position. This
makes best picture quality possible.When PAL channels are received the switch position is ineffective.
T
S
e
c
h
n
i
TechniSat EC 4004
6
HIFI AMPLIFIER
DECODER
TV
VCR
ba c
d
h
g
f
e
*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 6