Filter
Top Products
TechniSat EC 4004
8
4. Operation
4.1 General
4.1.1 Switching on and off
After being turned on,the receiver reselects the channel which was set before the device has been switched off.
Yet, if in the meantime the power supply has been interrupted, the device selects channel 1 upon powering up.
STANDBY
> switch on and off with or or
> switch on with ten-key keypad
4.1.2 Channel selection
> with ten-key keypad
> 7 8
> 3 (wait 4 s)
> 0 3
> with
CHANNEL
on remote control or on receiver
4.1.3 Volume
VOL
> with lower
> with higher
VOL
MUTE
> turn off with
4.1.4 Mono/stereo
M/ST
> select to switch between mono
> and stereo
4.2 D/D2 MAC reception
The reception of MAC channels is indicated by the second display element with a c.The following displays iden-
tify the different screen formats:
> screen format 4:3
> screen format 16:9
4.2.1 Colour intensity
*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 8