Filter
Top Products
PLAY/PAUSE MODE
STOPMODE
SKIPPLAY(Forboth CDand CDGdiscs.)
SEARCH (Foraudio CDdisc only.)
REPEAT
PROGRAM
!
!
!
!
!
!
!
To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE
LED will be lit.
To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED
Indicator willflash.
To resumeplay,press thisbutton again.
If the STOP button is pressed in the course of playing, the disc it will cease to play. (The total
number oftracks willbe shownon theLED display).
During STOP mode, you can skip up or down to your desired track number by pressing a
SKIPbutton( - SKIP- ).
To resumeplaying theselected song,press PLAY/PAUSE button.
When playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will
search at high speed in the forward or backward direction. Normal play will continue when you
release thebutton.
To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will
startto flash.
PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the
monitor. Any distortion will remain until the whole screen is refreshed during
an instrumental breakor youstop thesong andstartit fromthe beginning.
To repeat all tracks, press the REPEAT button twice. The REPEAT LED will remain
illuminated.
To clear the repeat function. Press the REPEAT button again. The REPEAT LED will no
longer illuminate.
!
!
!
Use thisbutton toprogram andplay backsongs ina preselectedorder.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [ ].
Step 2: Press the double arrow keys ( -SKIP- ) to select a desired track.
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
Press theSTOPbutton toclear allthe programmedentries.
E12
CD OR CD+G OPERATION
ENGLISH