Technicolor - Thomson 33ms25ud CRT Television User Manual


 
SOUND
Return
Sound type
Sound mode
Balance L/R
Treble
Bass
Surround effect
Automatic
Normal
(1)
Broadcast
mono
stereo
dual
NICAM-3
AV
Choice
automatic - mono
mono - stereo
sound 1 - sound 2
sound 1 - sound 2 - sound 3
stereo - sound 1 - sound 2
(2)
Mode Effect
Normal : reproduces the original sound (
mono or stereo).
Wide : gives a stereo effect on mono sounds.
Magic : accentuates the stereo effects and
adds echo.
Dolby Virtual : Virtual Dolby Surround.
Hall : Reverberation effect
(with rear speakers.)
Pro Logic : Cinema sound if the sound is coded in
Dolby Surround (with rear speakers.)
Virtual Dolby Surround is based on Dolby Pro Logic
decoding for the reproduction of the Left, Right, Centre and
Virtual Surround sound channels using two loudspeakers.
“”Dolby”, “”Pro Logic” and the double -D symbol are trademarks of the
Dolby Laboratories Licensing Corporation.
Manufactured under licence from Dolby Laboratories Licensing
Corporation.
Daily viewing
18
Stereo amplifier:
- Connect the left (L) and right (R) CINCH plugs from the television set to your amplifier.
- Connect the rear speakers (Surround) to the television set.
- Activate the Surround lineintheSOUND SETTINGS menu.
- Setthesound ofthe Left andRightchannels using the amplifierand the soundof the Centerand Rearchannels
(Surround) using the television set (SOUND SETTINGS menu).
In both cases, activate the Ext. amplifier function to cut the Left, Right and Center channels of the
television set (if you have also activated the Surround option, the central channel is not cut).
Note: If you do not connect an external amplifier, cancel this option.
Otherwise you will have no sound.
Sound type (1):
The choices available to you depend on
the broadcast.
Select this line, then select the type of sound you
desire.
Sound mode (2):
The choices available to you depend on the type
of sound you previously selected.
The
Magic and Dolby Virtual modes are only
availableinstereoifthe
Surroundlinehasnotbeen
activated in the
SOUND SETTINGS menu.
Select this line, then choose the desired mode
using the Left/Right keys.
Treble centre, Bass centre
These lines appear according to the
Sound mode
selected.
Select each of the lines and set the bass and
treble of the central channel.
Surround effect :
This line appears only if you have selected
Dolby Virtual
on the
Sound mode
line.
Select this line and adjust the surround effect to
suit you.
Treble, Bass :
Select each of these lines and adjust to suit you.
Exit the menu using
.