Filter
Top Products
Recording functions
27
EN
EN
Recording from a connected device
Your DTH 8000 allows you to copy TV programmes (satellite or cable) sequences, or video films
from a connected device.
From a satellite receiver or cable receiver
If you haven’t carried out the installation to control the receiver from the DTH 8000
(recommended on page 9), you must select the AV2 socket to which it is connected (check this).
1. Place a DVD+R or DVD+RW disc in the DTH 8000.
2. From the Main Menu and with the Watch TV function selected, press OK.The images of the
last channel watched appear.The information banner is displayed for several seconds.
3. Select the AV2 socket of the DTH 8000 using the AV key on the remote control in order to
display AV2 in the information banner and on the display (
LIVE AV2).
4. Record by pressing the REC key on the remote control or RECORD on the front panel.
5. Stop the recording by pressing twice on the STOP key.
From a Camcorder or other device
Your DTH 8000 has both RCA Audio-Video and Ushiden sockets for the transfer of video to a
recordable disc.
1. Place a DVD+R or DVD+RW disc in the DTH 8000.
2. From the Main Menu and with the Watch TV function selected, press OK.The images of the
last channel watched appear.The information banner is displayed for several seconds.
3. Select the AV3 sockets on the façade or AV4 to see the images from the connected device (S-
Video or composite).
4. Place the device in its play mode.
5. Record by pressing the REC key on the remote control or RECORD on the front panel.
6. Stop the recording by pressing twice on the STOP key.
DTH8000_en(EB-UB) 18/12/03 14:48 Page 27