Filter
Top Products
EN
EN
37
Playing a disc
Repeat playback of a scene between two points A and B
(DVD - VCD - SVCD)
A-B Repeat mode allows you to select exactly the sequence you wish to
repeat.
1. Select the repeat playback function using the or keys.
A-B Repeat appears under the banner.
2. Press OK to memorise the beginning of the scene you want to repeat
(point A).
3. Wait a few seconds before pressing OK again to mark the end of the
scene to be repeated (point B).A-B Repeat appears to tell you that the
repeat playback of the sequence is starting.To stop repeat, select another
mode using the or keys, or by pressing
STOP.
Note: repeat functions remain active until you turn them off, open the disc tray or
turn off the power. Repeat play only works with discs that show the elapsed time on
the display.This may not work correctly with certain discs (Video CDs in PBC mode).
Subtitle and dialogue language (DVD)
1. While reading a disc, press the INFO key: the information banner is
displayed.
2. Use the or keys to select the icon of the subtitles or dialogues as
well as the sound format.
3. If available on the disc, select the language of the subtitles or dialogues
using the or keys.The selected language name appears beneath
the banner.
Note: selecting the language of subtitles only involves the disc being played. If you
remove the disc or if you switch off the DTH 8000 your selection will be cancelled. In
this case the default language, chosen when your DTH 8000 was first installed, will
be reactivated. If the preferred language is not available on the DVD disc the
preferred language of the disc (default language) will be selected automatically.With
some discs you can only access the dialogue or subtitle languages through the menu
provided on the disc.
Selecting the
language of
subtitles
Selecting the
language of
dialogues
DTH8000_en(EB-UB) 18/12/03 14:48 Page 37