Filter
Top Products
Further information
56
Settings
The information relating to the Naviclick TV guide programmes comes from a combination of the
TV programmes guide,Teletext and NexTView service transmitted by certain channels.To
optimise the Naviclick programmes guide of your DTH 8000, you have the possibility of changing
certain settings as shown below.The information from the NexTView service is more reliable
than Teletext.
NexTView channel downloading time
The programs are downloaded either at 3 AM or 8 AM.To choose the downloading time, follow
the instructions below:
1. If the main menu is not displayed, press the MENU key on the remote control.
2. With the , keys, select Setup then Installation followed by Naviclick Setup. Each
time, press
OK to validate.
3. The line Update Time is already selected, press OK.
4. With the keys and OK, select 3 a.m or 8 a.m.
Note: by selecting Off your DTH 8000 will use, where available, the information on TV programmes from the
Teletext service of the channel being viewed. For those countries offering the NexTView service we
recommend that you set the downloading time to 3am. For all other countries set it to 8am.
Choice of NexTView channel
The downloading of programmes, via the NexTView service, is only possible on certain channels.
From step 2 above, select NexTView Channel and choose with the
PR+ or PR- keys, a channel
that broadcasts a programme guide. Hold the key down for a rapid selection. See the list of
channels on the following page.
Updating Naviclick (via Teletext)
Sometimes certain channels modify the organisation of their Teletext journal. In this case, unless
there has been a total modification of the structure, you must update the number of the first page
of Teletext allocated to the programmes guide.The list of pages is generally broadcast with the
Teletext journal. Use the Teletext function of your television set to find this information. Look for
the number of the page for the current day programmes and the number of the page for the
following day programmes. See also the limited list on the following page.
From step 2 above, select Channel Page and press
OK.The menu that is displayed indicates,
channel by channel, 2 Teletext page numbers (the first for current day programmes, the second for
the following day programmes).
To update this information, place the cursor on the channel to be modified using the keys.
Then enter the 2 numbers for the correct pages using the
number keys.
Note: For correct operation of the Naviclick guide described on
page 25, it is indispensable that a Teletext page number (for
those channels broadcasting it) is indicated for each channel.The
page numbers allocated to channels on this screen were set
during the installation of your DTH 8000.We recommend that
you do not change them.
DTH8000_en(EB-UB) 18/12/03 14:49 Page 56