Filter
Top Products
Connections and initial set up
3
EN
EN
1. Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DTH 8000.
2. Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DTH 8000 to the
g antenna socket of your TV set.
3. Using the Scart cable supplied, connect the DTH 8000’s AV 1 (TV) socket (TV) to the scart
socket of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the brand).
4. Use the mains cable to connect your DTH 8000 to a mains socket, by first connecting the
cable to the back of the DTH 8000.
Note: connection to a satellite or cable receiver is detailled on page 9.
Basic connections
Your DTH 8000 has many connection possibilities to allow it to fit into a setup comprising several
devices.We recommend that you follow the connection setup on this page, and then carry out
the adjustments shown on the following pages.You will first need to set up the channels as
explained in the following pages before the final interconnection of the devices,described on
pages 9 to 15.
TV
DTH 8000
220 - 240 V
50 - 60 Hz
DTH 8000 U
DTH 8000 E
Scart cable
Coaxial Cable
1
2
3
4
DTH8000_en(EB-UB) 18/12/03 14:48 Page 3