Filter
Top Products
EN
EN
11
Set-up
If your TV set is fitted with the NexTView Link
function or similar, the video recorder
automatically initiates channel download once
you have selected the country. You can view
channel download on the video recorder display
(Pr1, Pr2, Pr3…). On completion of download, the
video recorder switches over to standby. Channel
set-up is achieved.
When your television set is not fitted with the
NexTView Link or any similar feature, a message
tells you that your video recorder is searching
and storing the channels you can receive in your
region. Keep patient until a message informs you
that your channels are stored.
Clock setting
3a If date and time are correct, press EXIT to leave the
menus.
3b If the displayed time is incorrect or was not
transmitted, set the clock with the number keys 0 to
9: enter time and date in the following order: hour,
minute, day, month, year.
4 Store with OK.
5 Quit with EXIT.
Sorting the channels
The automatic channel set-up assigns the numbers to the channels in a predefined
order. These numbers may therefore not match the actual channel numbers. Should this
be the case, change these numbers by carrying out the instructions below. For easy
channel identification, we suggest that you have a TV magazine at hand.
1 Use the MENU key to call up the OVERVIEW menu.
2 The Installation line is already selected, press OK.
3 Use the ▼ key to select the Organiser line and confirm with OK.
4a If the proposed channel number matches the
displayed picture, press B to pass on to the next
channel.
4b If the proposed channel number does not
correspond to the picture that you see, select the
Swap with PR line using the ▼ key.
5 Using the number keys, enter the correct channel
number or select it using the C or B key.
6 Validate your choice using the OK key.
7 If the channel name is incomplete or does not correspond to the channel’s actual
name, select the Name line, and choose an available name using the C or B key,
or use the
1 and 2 number keys and then C or B to store a new one.
8 To delete a channel, select the Delete program. line and press OK twice.
9 When all channels are organised, press EXIT to leave the menus.
Time Day Month Year
--:-- -- -- 20--
0 - 9 OK
AUTO INSTALL COMPLETED
Leave B Organiser
EXIT
EXIT
DOWNLOAD COMPLETED
VCR
ORGANISER
Select program. B 03
Name FR3
Swap with PR --
Delete program. 03
0-9, CB, PR+- : Select
VCR
DTH6_UK 10/07/02 16:00 Page 11