Technicolor - Thomson DTH 6000 DVD VCR Combo User Manual


 
22
Use
Play
Simple play
1 Press OPEN/CLOSE on the front of the appliance to
open the disc tray.
2 Put the disc in with the printed side upwards (in the
case of a single-sided disc).
3 Press OPEN/CLOSE to close the disc tray.
4 Press PLAY to start playback.
Some discs provide a menu automatically. Choose a heading using
, , C and B
,
and confirm by pressing
OK
.
5 Press STOP to stop playback.
The player stores the point where playback was interrupted. If you press
PLAY
again,
playback resumes from this point. To stop playback completely or to start again
from the beginning, press
STOP
twice.
If the player is left in STOP mode for more than two minutes without any user
interaction, a screen saver is activated. Then, at the end of 30 minutes without any
user interaction, the player switches off automatically.
Accelerated play
While the disc is playing, press the REV. or FWD key one or more times to vary the
speed and direction of the accelerated play.
Still image – Frame advance (DVD and video CD)
Press PAUSE once for freeze frame.
After five minutes in PAUSE with no user interaction, the player goes into screen
saver mode.
Press PAUSE repeatedly to wind forward image by image.
Variable slow motion (DVD and video CD)
1 Press the PAUSE key once.
2 Press the REV. or FWD key a number of times to vary the speed and direction of the
slow motion.
Zoom function (DVD and video CD)
On some DVDs and video CDs, you can zoom into the centre of the picture during
playback and pause. For DVDs, the picture can be made 1.5, 2 or 4 times larger. For
video CDs, the picture can only be made twice as large.
1 Press the until you reach the zoom size you require.
2 Move from one area to another using the , , C and B keys.
DVD
DTH6_UK 10/07/02 16:00 Page 22