Filter
Top Products
12
Set-up
New or encoded channel
To complete the set-up of your video recorder when the automatic channel set-up has
not stored all of the channels or when you wish to store a new channel.
1 Press the VCR key on your remote control.
2 Using the MENU key call up the OVERVIEW menu.
3 The Installation line is already selected, press OK.
4 Using the ▼ key, select the Manual set up line and confirm with OK.
5 Select the Reception line with ▼ and choose CH (for
the channels received via your roof aerial) or CC (for
the cable network channels) using C or B.
6 Press ▼ to select the Autosearch line.
7 Press C or B several times to search for the channel
of a programme (you may also directly enter a
number with 0 to 9 keys).
When a channel is found, the pictures come up on
the screen.
8 When the picture is poor, try the Fine tuning (</>) using ▼, and then C or B.
9 If the channel is encoded (and you have a decoder connected to socket AV2), set
the cursor on Decoder using the ▼ key, and check the box using the OK key.
10 Position the cursor on Store on PR and assign a channel number using the number
keys 0 to 9 (example: 0, 1 for Pr1).
11 Press OK to store this number.
12 If you wish to continue with TV channel set-up, repeat the steps 7 to 11. Otherwise
press EXIT.
Reception CH
Autosearch CH53
< / > ___
l
___
Store on PR
03
Decoder
VCR
DTH6_UK 10/07/02 16:00 Page 12