Filter
Top Products
GB
GB
11
Use
☺
To view a tape and explore the recordings, to view a still
image and retrieve particular scenes in the accelerated
play mode, to rewind to the beginning or wind fast
forward to the end of the tape.
Viewing a tape
To view a channel via the video
recorder
1 Switch the television set and the video recorder on.
2 Press the TV (2) key, then press the AV (23) key. The picture corresponding with the
channel which has been selected on the video recorder is displayed on the television
screen.
3 Press the VCR (1) to control the video recorder, and using the keys 0 to 9 (19) or the
PR+/PR- (18) key to change channels.
Viewing a tape
Play
1 Load a tape
2 Press PLAY (25) key.
☺
When the picture is poor, adjust the phase (page 18). If the colour is not reproduced
properly, try another standard (PAL, SECAM or MESECAM) selectable in the PICTURE
menu (page 19).
Accelerated play
In play mode, press REW. (24) or FWD. (26) key repeatedly to change the speed and
direction of accelerated play.
☺
You may also use the SHUTTLE (outer ring) which is situated on the front side of the video
recorder to manipulate accelerated play.
Still image - Pause
In play mode, press PAUSE (28) key to pause a picture, and press repeatedly to wind
forward image by image.
Variable slow motion
1 Press the PAUSE (28) key.
2 Press REW. (24) or FWD. (26) key to change the speed and direction of slow
motion.
☺
The inner knob JOG fitted to the front of the video recorder may also be used to explore an
image by image sequence in both forward or backward play.
Stop
Press STOP (27) key to stop play.
Rewind or Fast Forward
1 Press the STOP (27) key.
2 Press the REW. (24) or FWD. (26) keys.
Ejection of the tape
1 Switch the video recorder to STOP.
2 Press the EJECT key on the front of the video recorder.
☺ Jog & Shuttle
(on the front side of the video recorder)
r93s_GB01 9/06/00 11:28 Page 11