Filter
Top Products
Load a tape and position it to the desired section with keys REW., FWD., STOP, PLAY
(24, 26, 27, 25).
With the SHOWVIEW
®
programming
numbers
☺
When programming for the first time, the video recorder positions
itself on channel number so that you can confirm or enter the
channel number.
1 Call up the SHOWVIEW menu with PROG. (5) key.
2 Enter the number of the programme you wish to record, which you will find in your
TV programme, and validate with OK (13).
" The T
IMER menu appears. The Stop time line is selected.
3 You can complete your programming by selecting a recording triggered by VPS/PDC
signals, recording frequency (single, daily, weekly), recording speed (SP/LP), recording
sub-titles (from Teletext) at the same time as the programme.
4 Press OK (13) to verify your recording time on the Timer review line : if not, press
EXIT (14) key.
5 Switch the video recorder on standby-record with
BB
(3) key.
☺
If the recording is through a satellite receiver, leave this switched on.
Without the ShowView
®
numbers
☺
If you don't know the SHOWVIEW number of the programme
you wish to record, you'll have to use the RECORD TIMER
menu.
1 Display the SUMMARY menu with the MENU
(15) key.
2
Select Record Timer line with
▼ (11)
key
and
validate with OK (13).
" The R
ECORD
T
IMER
menu comes up.
3 With the keys 0 to 9 (19) or
CC
(12) or
BB
(10)
keys, to enter the channel number you wish to record
or if not select an AV socket.
4 Enter the following information by selecting the corresponding line with the ▼ (11) key,
then with the keys 0 to 9 (19) or
CC
(12) or
BB
(10) keys:
14
Use
SHOWVIEWis a registered trademark of Gemstar Development Corporation.
The SHOWVIEWsystem is manufactured under licence from Gemstar Development Corporation.
☺
You can programme a recording with the SHOWVIEW
®
programming
numbers indicated in your TV magazine or by means of timer
programming if you don't know these numbers. Your video recorder
has 8 programming memories. Thus, you'll be able to programme 8
recordings over a 1-year period.
Programming a
recording
RECORD TIMER
Return
T
T
imer No.
imer No. CC
❙❙
BB
7
7
Programme No. Pr
- ----
Start time --:--
Stop time --:--
Date 20/07
VPS/PDC No...
How often Once...
Speed SP...
Subtitle Yes...
Clear timer 7
Timer review
16.2516.25
FUNNY TIMES
film
Drama-comedy
58624
TUESDAY
SHOWVIEW programming number
r93s_GB01 9/06/00 11:28 Page 14