Filter
Top Products
GB
GB
13
Use
☺
The NAVICLICK function enables you to display every channel’s
programme on your screen and to programme your recordings for the
day with a simple click.
Consulting TV programmes with NAVICLICK
1 Select a channel on your video recorder.
2 Press the GUIDE (7) key to display the NAVICLICK page.
☺
This function is available on most of the channels displaying the Teletext (for satellite channels first
select SA with the AV key).
Programming a recording with NAVICLICK
1 Select a channel on your video recorder.
2 Press GUIDE (7) key and wait until the NAVICLICK page appears.
3 Press ▲ (9) and ▼ (11) keys to select the programme you wish to record.
4 Press OK (13) to validate your choice.
5 The T
IMER REVIEW menu appears. Verify your programming and press EXIT (14) to
exit the menu.
6 Switch off the video recorder to put it into standby mode.
Updating NAVICLICK
☺
In the event of some channels modifying their teletext structure, except in the case of a total
modification of the structure, you can update the number of the first page of the teletext of the
programme guide.
1 Press MENU (15) key to display S
UMMARY
menu.
2 Select Installation line.
=> I
NSTALLATION menu appears.
3 Select the NAVICLICK set up line.
4 The menu which appears indicates 3 numbers of the Teletext page channel by channel:
those of the current day's programmes, those of the following day's programmes and
finally those of the page reserved for sub-titles.
5 In order to update information, set the channel to be modified, set page number to be
corrected with
CC
(12) or
BB
(10) keys, and enter your corrections with keys 0 to 9
(21). Validate with OK (13).
r93s_GB01 9/06/00 11:28 Page 13