Filter
Top Products
Chapter 3: Using the remote control
1
Learning about the remote control
The buttons used for operating the TV only are described
here. For a complete list of the remote control’s functions, see
the remote control functional key chart ( page 23).
Note: The error message “NOT AVAILABLE” may appear if
you press a key for a function that is not available.
POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
FREEZE freezes the picture. Press again to restore the
moving picture ( page 40).
SLEEP accesses the sleep timer ( page 49).
PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, Native and Dot by
Dot ( page 39).
Channel Numbers (0–9, –/100) directly tune
channels. The button is used to tune digital channels
( page 37) or to edit the Favorites List ( page 35).
INPUT selects the video input source ( page 34).
CH pq cycles through programmed channels when no
menu is on-screen ( page 30).
VOL + – adjusts the volume level.
FAV BROWSER accesses the Favorites List in the
Channel Brower™ ( page 35).
RECALL displays TV status information ( page 50).
CH RTN returns to the last viewed channel or source
( page 37).
MUTE reduces or turns off the sound ( page 43).
INFO displays TV status information as well as program
details, when available ( page 50).
/ While watching TV, these buttons open the
Channel Browser™ and tune to the previous/next channel
in the channel history ( page 36). (Also see “Arrow
buttons.”)
Arrow buttons (pqtu) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see / .)
ENTER activates highlighted items in the main menu
system.
MENU accesses the main TV menu system ( pages 27
and 28).
EXIT closes on-screen menus.
MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes ( page 22).
Set to “TV” to control the TV.
1�
2�
3�
4�
5�
6�
7�
8�
9�
10�
11�
12�
13�
14�
15�
16�
17�
18�
19�