Filter
Top Products
15
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Connecting your TV
Connecting an analog audio system
This connection allows you to use external speakers with an external audio
amplifier to adjust the sound level.
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page
42.)
Note: To hear sound when using an external audio amplifier, the volume of both
the TV and the amplifier must be set to a reasonable listening level.
TV back panel
Analog audio amplifier
Connecting a digital audio system with
built-in digital surround
The TV’s two digital audio outputs output a Dolby* Digital or 2-
channel down-mixed PCM (pulse-code modulation) signal for use with an
external Dolby Digital decoder or other external audio system with optical or
coaxial audio input.
You will need:
• one pair of standard audio cables
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver’s inputs.
Consult the owner’s manual for your receiver to determine the best way to switch between the analog and digital signals.
Coaxial
audio cable
AV Amplifier with built-in digital surround
You will need:
• one optical audio cable or coaxial
audio cable.
TV back panel
Optical
audio cable
Note:
Refer to the Owner’s manual of the
audio amplifier as well.
Connect
either
3X70701A_En_p10-17 3/7/06, 6:24 PM15