Filter
Top Products
32
Using the TV’s Features
INPUT DISPLAY
Note:
After a power failure or disconnection of the
power, the timer settings will be lost.
Setting the ON timer
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to “DAILY,” the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
To set the ON timer: (Example: Turning on the TV to channel 2 at
6:30 AM, DAILY)
1. Press TV to select the TV mode.
2. Set the clock, if you have not already done so (see page 31.)
3. Press MENU, then press
or to display the OPTION menu.
4. Press ▲ or ▼ to highlight ON TIMER.
5. Press
or to highlight SET, then press ENTER. The ON TIMER
menu appears. Press
to set the time.
6. Press ▲ or ▼ to set the desired hour, then press .
7. Set the desired minutes and channel, as in step 6.
8. Press
or to select ONCE or DAILY, then press ENTER.
9. Press EXIT to return to normal viewing.
To cancel the on timer:
Select CLEAR in step 8, above.
Setting the sleep timer
You can use the sleep timer to automatically turn off the TV at a set
time.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will increase 10 minutes for each
press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m.) After
the sleep timer is programmed, the display will appear briefly every
ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Menu/
Enter
Exit
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
ON TIMER
ON TIMER
6:30AM CH 2
CLEAR
RETURN
SELECT ADJUST
ON TIMER
ON TIMER
6:30AM CH 2
ONCE / DAILY / CLEAR
RETURN
SELECT ENTER:SET
INPUT DISPLAY
Sleep
TV
3X70701A_En_p32-41 3/7/06, 6:25 PM32