Filter
Top Products
47
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Symptom Solution
Unable to select a certain channel • The channel may be blocked by the V-Chip feature or CH LOCK
feature, or erased with the add/erase feature.
Cannot access signal input sources (VIDEO-1, • Check the VIDEO LOCK feature.
VIDEO-2, VIDEO-3, ColorStream HD-1,
ColorStream HD-2, HDMI-1, HDMI-2 and PC)
and/or Channels 3 and 4
Multiple images • The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
Poor color or no color • The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
No stereo or SAP sound from a • Make sure the MTS feature (in the AUDIO menu) is set properly.
known MTS broadcast
The V-Chip password does not work • Change or reset your password.
(U.S. V-Chip system only)
The remote control does not operate • Make sure the TV • CBL/SAT • VCR • DVD mode is set properly on the
remote control.
• Remove all obstructions between the remote control and the TV.
• The remote control batteries may be dead. Replace the batteries.
The side panel buttons do not operate • Check the PANEL LOCK feature.
Digital broadcasting screen problem • Check the digital signal strength.
Closed Caption box appears with no text • Make sure the Closed Caption “Text Color” and “Background Color” are
not set to the same color (see page 37.)
3X70701A_En_p46-bc 3/7/06, 6:26 PM47