Filter
Top Products
23
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Starting setup
The STARTING SETUP feature appears the first time you turn on the
TV, and helps you select the menu language, specify the TV/CABLE
setting, and program channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system is
connected.
1. Press TV to select the TV mode.
2. Press POWER to turn on the TV. The STARTING SETUP function
begins and the language setup menu appears on the screen.
Press ▲ or ▼ to select your desired
language, then press ENTER.
3. Press ▲ or ▼ to select TV or
CABLE, then press ENTER.
4. Press ▲ or ▼ to select START, and
then press ENTER, which
starts the AUTO SETUP.
Note:
To cancel the setup and return to the regular TV screen, press ▲
or ▼ to select CANCEL and press ENTER.
5. When the AUTO SETUP is complete, the regular TV screen
appears.
Notes:
•AUTO SETUP of channels may take 15–30 minutes to complete,
depending on your regional cable service.
•To cancel the AUTO SETUP and return to the regular TV screen,
press EXIT.
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system. You can access the menu system with the buttons on the
remote control.
• When you make a menu selection, your changes are immediate.
You do not have to press MENU or EXIT to save your changes.
• After one minute, the menu screen will automatically close if you do
not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press TV to select the TV mode.
2. Press MENU, then press
or until the SETUP menu appears.
3. Press ▲ or ▼ to highlight LANGUAGE.
4. Press or to highlight your desired language.
:SELECT ENTER: SET
LANGUAGE / LANGUE / IDIOMA
ENGLISH
FRANÇAIS
ESPAÑOL
SETUP
LANGUAGE ENGLISH
CLOCK SET
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE
SELECT ADJUST
CT-885
INPUT DISPLAY
Note:
The position and size of the on-screen menus
may change for some program formats (such
as 1080i or 720p.)
Menu/Enter
Exit
POWER
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
3X70701A_En_p18-25 3/7/06, 6:24 PM23