Filter
Top Products
44
Selecting the audio languages
When two or more audio languages are included in a digital signal, you
can select one of the audio languages.
To select the audio language:
1. Press TV to select the TV mode.
2. Press MENU, then press
or to
display the AUDIO menu.
3. Press ▲ or ▼ to highlight AUDIO
LANGUAGE, then press
.
4. Press ▲ or ▼ to select the desired
language, then press ENTER.
5. Press EXIT to return to normal viewing.
Selecting the digital output format
You can choose the format of the digital audio output signal.
To select the digital output format:
1. Press TV to select the TV mode.
2.
Press MENU, then press
or to
display the AUDIO menu.
3. Press ▲ or ▼ to highlight DIGITAL
OUTPUT.
4.
Press
or
to highlight PCM or
DOLBY* DIGITAL.
5.
Press
EXIT to return to normal viewing.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Checking the digital signal strength
You can check the strength of the digital signal by viewing the digital
signal meter.
To view the digital signal meter:
1. Press TV to select the TV mode.
2. Press MENU, then press
or
to display the SETUP menu.
3. Press ▲ or ▼ to highlight SIGNAL
METER.
4. Press
or to check the digital-
signal strength.
5. Press EXIT to return to the normal
screen.
Displaying TV status information on-screen
Press DISPLAY to display the following information on-screen:
Analog channel:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if set)
• Stereo or SAP (second audio
program) audio status
• Content rating
• On timer, Sleep timer (if set)
• Picture size, Picture format
Digital channel:
• Clock
• Channel number, station name,
program name
• Remaining time • Audio language
• Content rating • HD or SD mark
• Closed Caption mark • V-Chip mark
STEREO
SAP
TV-PG L V
ON TIMER 12:00AM
SLEEP TIMER 2h00m
ANT
ABCD
NATURAL CABLE
480i
CLOCK 12:00AM SUN
7
SIGNAL METER
CHANNEL (DIGITAL) 1-001
80
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT PCM
RESET
SELECT ADJUST
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT PCM
PCM / DOLBY DIGITAL
RESET
SELECT ADJUST
51-3
CITYHD
Moon Star
Remaining Time 0:20 TV-Y7
English
No program information is available.
SUN Jan 01 12:00 PM
HD CC
INPUT DISPLAY
Menu/Enter
Exit
TV
Notes:
• The signal meter feature is not available for
analog channels.
• After approximately 4 minutes, the SIGNAL
METER screen will return to normal TV
operation automatically.
• When you select a vacant channel, the
signal meter may react.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Note:
•
Analog channel status will display on the
screen for approx. 4 seconds.
• Digital channel status will display on the
screen for approx. 10 seconds. Press
RECALL again, the analog channel status
will display.
Display
Using the TV’s Features
3X70701A_En_p42-45 3/7/06, 6:25 PM44