Filter
Top Products
39
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the brightness, contrast, color, tint, and sharpness. The
qualities you choose will be stored automatically in the PICTURE
menu’s MEMORY mode, so you can recall them at any time.
To adjust the picture quality:
1. Press TV to select the TV mode.
2. Press MENU, then press
or to display the PICTURE menu.
3. Press ▲ or ▼ until the item you want to adjust is highlighted.
Selection Pressing
BRIGHTNESS darker lighter
CONTRAST lower higher
COLOR paler deeper
TINT reddish greenish
SHARPNESS softer sharper
Adjusting the picture
Selecting the picture mode
You can select from four picture modes—Sports, Standard, Movie, and
Memory—as described in the following table:
To select the picture mode:
1. Press TV to select the TV mode.
2. Press MENU, then press
or to display the PICTURE menu.
3. Press ▲ or ▼ to highlight MODE.
4. Press or to highlight the mode you prefer.
5. Press EXIT to return to normal viewing.
Mode Picture Quality
SPORTS Bright and dynamic picture (factory-set)
STANDARD Standard picture quality (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you; see
“Adjusting the picture quality”)
4. Press or to adjust the level.
5. Press EXIT to return to normal viewing.
CT-885
INPUT DISPLAY
Exit
Menu/Enter
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
PICTURE
MODE SPORTS
SPORTS / STANDARD / MOVIE / MEMORY
BRIGHTNESS 25
CONTRAST 50
COLOR 25
TINT 0
SHARPNESS 25
SELECT ADJUST
PICTURE
MODE SPORTS
BRIGHTNESS 25
CONTRAST 50
COLOR 25
TINT 0
SHARPNESS 25
SELECT ADJUST
3X70701A_En_p32-41 3/7/06, 6:25 PM39