Filter
Top Products
31
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Using the TV’s Features
Setting the clock
You must set the clock before you can program the ON timer.
To set the clock:
1. Press TV to select the TV mode.
2. Press MENU, then press or to
display the SETUP menu.
3. Press ▲ or ▼ to highlight CLOCK
SET, then press
.
4. Press
or to set the MONTH, then
press ▼.
5. Set the DAY, YEAR and TIME as in
step 4.
After setting the clock, the date and
time function starts automatically.
6. Press EXIT to return to the normal
screen.
Selecting the video input source
Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select ANT, VIDEO1, VIDEO2, VIDEO3
ColorStream HD1, ColorStream HD2,
HDMI1, HDMI2 or PC, depending on
which input jacks you used to connect
your devices (see “Connecting your
TV” on page 8.)
Pressing INPUT on the remote
control displays the current
signal source (press INPUT
again or 0-8 to change)
You also can use the Channel / buttons to select the video input
source. In addition to cycling through your programmed channels
(page 24), the Channel
/ buttons will also cycle through the video
input sources, in the order illustrated below.
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD :DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device
To label the video input sources:
1. Press TV to select the TV mode.
2. Press MENU, then press
or to
display the OPTION menu.
3. Press ▲ or ▼ to highlight VIDEO
LABEL.
4. Press
to display the VIDEO
LABEL menu.
5. Press ▲ or ▼ to highlight the video
source you want to label.
6. Press
or to select the desired
label for that input source.
7. Press EXIT to return to normal
viewing.
VIDEO LABEL
1.VIDEO1
— / VCR / DVD / DTV
2.VIDEO2
— SAT / CBL
3.VIDEO3
—
4.ColorStream HD1
—
5.ColorStream HD2
—
6.HDMI1
—
7.HDMI2
—
RETURN
SELECT ADJUST
TV
Exit
Note:
After a power failure or disconnection of the
power, the clock settings will be lost.
Please note the following regarding
the HDMI1 and HDMI2 source selections:
See “Connecting an HDMI™ or DVI
device” on page 14 and “Connecting a
PC” on page 17 for details.
Input
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Menu/Enter
OPTION
ON TIMER OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
SELECT ADJUST
SETUP
LANGUAGE ENGLISH
CLOCK SET
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE
SELECT ADJUST
Channel
/
NOTE: DO NOT CONNECT A
PC USING ONE OF THE
HDMI INPUTS.
ALWAYS use the VGA port provided to connect a PC.
Channel
Numbers
3X70701A_En_p26-31 3/7/06, 6:25 PM31