Filter
Top Products
28
Chapter 5: Setting up your TV
How to navigate the menu:
> Settings > Main menu > Submenu >
Changing Initial settings
From Quick Setup:
1 > Settings > SETUP > Quick Setup > .
2 A confirmation message appears. Press C or c to
select Yes. Press .
3 For changing settings, see “Initial Setup” (- p. 24).
From individual settings:
Menu language
You can choose from three different language settings
(English, Français, and Español) for menus and
messages
1 > Settings > SETUP > Menu Language.
2 Press C or c to select your preferred language. Press
.
Local Time Setting
This setting allows you to specify the correct time zone
for your region.
1 > Settings > SETUP > TV Settings > .
2 Press B or b to select Local Time Setting. Press .
3 Select an option:
• Time Zone
• Daylight Saving Time
4 Press C or c to select your time zone or to select On
to activate Daylight Saving Time. Press .
Location
You can select Home or Store for the TV location. For
normal home use, select Home.
1 > Settings > SETUP > Location.
2 Press C or c to select Home. Press .
ANT/CABLE IN
This setting configures the antenna input source for the
ANT/CABLE terminal.
1 > Settings > SETUP > ANT/CABLE In.
2 Press C or c to select the input source (Antenna or
Cable) for the ANT/CABLE input. Press .
Storing channels in memory
(optional)
To make sure your TV stops only on the channels you
want when you press or on the remote control or
the control panel, store those channels in the TV’s
memory.
Auto Tuning
Note: You must set up the antenna/cable input source first.
See “Initial Setup” (-p. 24).
You can set up the TV to detect all active channels in
your area and store them in its memory. Then you can
manually store or skip individual channels from
memory.
Note: To tune channels not stored in memory, use buttons
0–9 and on the remote control.
Format Description
Press the MENU button.
Settings Press C or c to select Settings.
> Main menu
Press C or c to select a menu
icon (PICTURE, SOUND,
APPLICATIONS,
PREFERENCES, SETUP)
> Submenu Press B or b to select a menu.
> Press the OK button
OK
OK
OK
OK
OK
OK
Option Description
Cable
Note: If you select Cable, auto tuning
deletes previously stored channels from
memory.
This setup requires some time, but you
do not need to repeat the setup unless
your cable TV service’s lineup changes
significantly.
Antenna
Auto tuning retains stored channels and
stores newly found channels into
memory.
To skip an antenna source channel from
memory, set the channel to be skipped.
See “Skipping channels”.
CH
CH
-