Filter
Top Products
57
Chapter 8: Advanced features
Manual Setup
1 > Settings > PREFERENCES > Network
Setup > .
2 Press B or b to select Wireless Setup. Press .
3 Press B or b to select Manual Setup. Press .
4 Press B or b to select Network Name. Press .
The Software Keyboard window appears.
5 Input the Network Name using the Software
Keyboard (- p. 59). To save your settings, press
the BLUE button.
6 Press B or b to highlight Authentication. Press C
or c to select Open/Shared, WPA-PSK, or WPA2-
PSK.
7 Press B or b to highlight Encryption. Press C or c
to select None, WEP, TKIP, or AES.
Note:
•Certain encryption types are only compatible with
specific authentication types.
-When Authentication is Open/Shared, only WEP or
None are compatible.
-When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES are compatible.
•When incompatible Authentication/Encryption
pairings are attempted, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
8 Press B or b to select Security Key. Press . The
Software Keyboard window appears.
9 Input the Security Key using the Software
Keyboard (- p. 59). To save your settings, press
the BLUE button.
Note: This item is grayed out when Encryption is
None.
10 Select Done. Press .
Note: When Encryption is None, a message will
appear. Press C or c to select Yes. Press .
Note: Settings are not saved if is pressed before
Done is selected.
Wireless Information
The settings configured in Wireless Setup can be
confirmed.
1 > Network > Wireless Information > .
2 A Wireless Information screen will appear.
Note: Press the RED button to check the availability of
surrounding APs.
Note: This feature is available from the Quick menu while
using Media Player or NET TV feature.
> Wireless Information > .
Note: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value might
be low. We recommend that the Encryption setting be
changed to AES (Under manual setup).
OK
OK
OK
OK
OK
OK
OK
Item Description
Status
Connected is displayed when the TV is
connected to the AP.
Disconnected is displayed when the
TV is disconnected from the AP.
Signal
Connection signal strength with the AP
(STRONG/MEDIUM/WEAK)
Speed The link speed with the AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel The channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP's MAC address is displayed
when the TV is connected to the AP.
TV MAC
Address
The TV’s MAC address
DHCP
Enabled is displayed when you use
DHCP.
Disabled is displayed when you do not
use DHCP.
IP Address
The TV's IP address
Subnet Mask
Value of the Subnet Mask
Default
Gateway
Default GATEWAY’s address
DNS
DNS’s address
OK
QUICK
OK