Filter
Top Products
Picture and Sound Controls
99
Using the advanced picture settings features
NOTE
Some of the Advanced Picture Settings features will not be available for
adjustment when the Picture Mode is set to AutoView.
Edge Enhancer
If the Edge Enhancer set to On, the clarity levels can be adjusted
automatically.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Edge Enhancer and
press the OK button.
3 Press the
p
/
q
(arrow) buttons to select On.
4 Press the EXIT button.
NOTE
❖
If the picture mode is set to AutoView, Edge Enhancer is not
available.
❖
This feature may not work properly depending on the content.
❖
Noise may appear on the image depending on the device connected to
the TV (e.g. a device with a specific enhancer function).
Dynamic Contrast
Dynamic Contrast detects changes in picture quality that affect the
appearance of your contrast settings and then automatically adjusts the
video.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Dynamic Contrast
and press the OK button.
3 Press the
p
/
q
(arrow) buttons to select High, Middle, Low, or
Off.
4 Press the EXIT button.
Using the advanced picture settings features