Toshiba 58L7300U Flat Panel Television User Manual


 
Picture and Sound Controls
109
Adjusting the audio
NOTE
This feature is available when Dolby
®
Digital or Dolby
®
Digital Plus is input
to the TV in the following situations:
When tuned to a digital RF channel
When an HDMI
input is used
This feature is automatically set to Off when Dynamic Volume (Audyssey
Dynamic Volume
®
) is set to Day or Night.
This feature will also affect Digital Audio Output when the optical audio
output format is set to PCM.
Audyssey Premium Television™
These televisions use a suite of technologies for better sound including:
Audyssey EQ
®
—provides clear, accurate and natural sound right
out of the box. This technology ensures you enjoy your audio
experience as much as your video.
Audyssey ABX™—technology uses sophisticated driver analysis
and low frequency monitoring to extend the range and bass of small
speakers. This enables the system to produce lower frequencies than
would be possible with a traditional system of the same size.
Audyssey Dynamic Volume
®
—automatically adjusts volume to
provide a consistent sound level between television programs,
commercials, and between the loud and soft passages of movies.
Audyssey Volume Extension
®
—doubles the volume capability in
small speakers while blocking distortion so your TV gets loud and
still sounds great.
Day/Night Modes—automatically keeps the volume of the TV at
the perfect level for day or night.
Wall/Table Modes—automatically keeps the volume at the perfect
level for television mounted on a wall or located on a table-top.
Using Audyssey EQ
®
for Wall Mounted or Table-top TVs
This feature automatically keeps the volume at the perfect level for
television mounted on a wall or located on a table-top.
1 Press the SETUP button.
2 Select Sound > Audyssey Premium Television > TV Mounting
and press the OK button.
3 Press the
p
/
q
(arrow) buttons to select Wall or Table.