Toshiba 58L7300U Flat Panel Television User Manual


 
84
Basic features
Other HDMI
CEC Control functions
When Enable HDMI CEC Control and all items in the HDMI
CEC
Control Setup menu are set to On, the following functions will be
enabled:
Item: Description:
TV Auto Power If an HDMI
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, it will send a message to turn off all of the
HDMI
CEC devices connected to the TV.
Amplifier Control If Amplifier Control is set to On, you can adjust the sound volume
or turn off the sound using the remote control.
Initial Speaker
Setting
With this item, you can set your audio output preference to the TV
Speakers or the Amplifier. When this item is set to Amplifier, the remote
control can be used to adjust or mute the volume of the audio. This
item will not be available and set to TV Speakers automatically unless
an HDMI
CEC compatible audio system is connected.
NOTE
When you turn on the audio system, change its input source, or adjust the
sound volume, the sound will be output from the audio system’s speakers
even if TV Speakers has been selected. Turn the TV off and on again to
output the sound from the TV speakers.
Viewing the HDMI
signal information
1 Press the SETUP button.
2 Select Options > HDMI Information Display and press the OK
button.
3 Press the
p
/
q
(arrow) buttons to select On.
4 Press the INFO button.
HDMI
Information is shown (Resolution, Scan Type, Frame
Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma
Format), and the normal banner and signal information banner
appear.
NOTE
The signal information banner will appear when this feature is set to
On and you watch an HDMI
input and press the INFO button. The
signal information will disappear after 60 seconds.
If you press the INFO button when this feature is set to Off, only the
normal banner will appear.
Viewing the HDMI
signal information