Filter
Top Products
Troubleshooting
161
Other problems.
If your TV’s problem is not addressed in this Troubleshooting chapter or
the recommended solution has not worked, use the Reset Factory Defaults
procedure, see “Resetting to Factory Defaults” on page 90.
TV will not turn on.
Check the AC wall outlet by trying another device in the AC wall outlet.
Ensure the power cord is plugged in properly, and then press the POWER
button.
Replace the batteries in the remote control, see “Installing batteries” on
page 47.
Try the control panel buttons on the TV.
Picture problems
General picture problems.
Check the antenna/cable connections, see “Connecting Your TV” on page
27.
Press the INPUT button on the remote control or on the TV and select a
valid video input source, see “Selecting the video input to view” on page
71. If you have no picture after selecting a Input source, check the
device connected to that input for proper operation. For device connection
details, see “Connecting Your TV” on page 27.
Antenna reception may be poor. Use a highly directional outdoor antenna
(if applicable).
Thestationmaybehavingbroadcastdifculties.Tryanotherchannel.
Adjust the picture quality, see “Using the advanced picture settings
features” on page 99.
If Edge Enhancer does not achieve a sharper picture, change the
Sharpness value to increase the sharpness level, see “Edge Enhancer” on
page 99.
Video Input Selection problems.
If the Input Selection window does not appear when you press the INPUT
button on the remote control or the TV control panel, press the INPUT
button a second time. The TV displays the next video input source and the
Input Selection screen.
Cannot view external signals.
If you cannot view signals from external devices connected to VIDEO 1,
VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC,
ensure that the Input Lock is set to Off, see “Locking video inputs” on
page 80.
Picture problems