Filter
Top Products
Connecting Your TV
33
NOTE
When you use ColorStream
®
HD or Video, please switch to the appropriate
AV mode.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream
®
HD video input source
on the TV.*
To view satellite programs using the component video connections:
Turn ON the satellite receiver. Select the ColorStream
®
HD video input
source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to watch.
Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select the
ColorStream
®
HD video input source on the TV* to view the DVD.
*To select the video input source, press the INPUT button on the remote
control, see “Selecting the video input to view” on page 71.
NOTE
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
Connecting remote IR devices
Using the IR blaster OUT terminal
You can use the TV’s IR OUT terminal to remotely operate many infrared
remote-controlled devices enclosed in an entertainment center or similar
cabinet.
Items needed:
❖
Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on
page 28)
❖
Other cables as required to connect the device(s) to the TV (see
“Overview of cable types” on page 27)
See the remote IR blaster setup section (see page 58).
Connecting remote IR devices