Toshiba 62HM15A Projection Television User Manual


 
91
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length
of time (maximum of 3 hours). The sleep timer turns off the TV
one time only, as opposed to the On/Off Timer, which turns off
the TV on a recurring basis.
To set the sleep timer:
Press SLEEP on the remote control to set the length of time until
the TV turns off. Repeatedly press SLEEP to increase the time in
10-minute increments or press y or z to increase or decrease the
time in 10-minute increments, to a maximum of 3 hours and 00
minutes.
To cancel the sleep timer:
Press SLEEP until it is set to 0.
To set the sleep timer using the on-screen menus:
1. Press MENU and open the Setup menu.
2. Press z to highlight Sleep Timer and press ENTER.
Navigate
Select
Back Exit
CH RTN
EXIT
Installation
Sleep Timer
On/Off Timer
HDMI 1 Audio
Auto
Auto
2 Sec
HDMI 2 Audio
Slide Show Interval
AVHD Skip Time
Setup
15 min
3. Press the Number buttons to enter the length of time in
10-minute increments.
Sleep Timer
Enter total minutes until the TV
turns off automatically (Maximum
180 minutes)
1 2 0
Cancel
Done
4. Highlight Done and press ENTER.
Note:
When a power failure occurs, the sleep timer setting may be cleared.
To display the amount of time left on the sleep timer, press RECALL.
To display the remaining time on the sleep timer:
Press SLEEP.
Sleep Timer
1h10m
Note:
A message will display on-screen when there is one minute
remaining on the sleep timer.
SLEEP
Setting the On/Off Timer
You can use the On/Off Timer to turn the TV on and off at a
preset time on a recurring basis.
Note: You must first set the time (see page 50).
To set the On/Off Timer:
1. Press MENU and open the Setup menu.
2. Highlight On/Off Timer and press ENTER.
Navigate
Select
Back Exit
CH RTN
EXIT
Installation
Sleep Timer
On/Off Timer
HDMI 1 Audio
Auto
Auto
2 Sec
HDMI 2 Audio
Slide Show Interval
AVHD Skip Time
Setup
15 min
3. Press z to highlight the DAY field, and then press x or
to select the recurrence (weekends, weekdays, every day,
etc).
On/Off Timer
Turn TV ON:
:
Weekends
Time (HH:MM)
TV ON Duration:
30 Minutes
Reset DoneCancel
Day
09 00 AM
4. Press z to highlight the Time field, and then use the
Number buttons to enter the time you want the TV to turn
on.
5. When the AM/PM field is highlighted, press x or to
select AM or PM.
6. Press z to highlight the TV ON Duration field, and then
press x or to select the length of time until the TV turns
off.
7. Highlight Done and press ENTER.
8. Turn off the TV. The TV will turn on automatically on the
day(s) and at the time you set. The TV will then turn off
automatically after the length of time you set in the TV
ON Duration field.
Note:
When a power failure occurs, the On/Off Timer settings may
be cleared.
To display the On Timer setting, press RECALL.
To turn off the On/Off Timer:
Select Not Set in step 3 above.
On/Off Timer
Turn TV ON:
Not SetDay
Reset DoneCancel
Chapter 8: Using the TV’s features