Filter
Top Products
15
Connections
Notes:
This unit is compatible with TOSHIBA’s Wireless LAN Adapter only.•
Model name: WLM-10UB1
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of •
the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, •
obstacle, interference by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.•
When applying the security key for the AP (wireless IP sharer), only the following is supported.•
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
(Need the
Your Blu-ray disc player can also be connected to network with a Wireless access point.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the
USB port on the rear panel of the Blu-ray Disc Player, and set the wireless network options (See Step 2 ~ 3).
2. After the Wi-Fi device inserts to USB terminal, press
/ to select “Network” from Settings, and press OK to enter.
3. Press
/ to select “Wireless”, and press OK to enter.
(For detailed information, please refer to the user guide for WLM-10UB1.)
AC IN
LAN USB
HDMI OUT
RL
YP
B PR
SBL
CSLFL
SBR
SW SR FR
MULTI CHANNEL AUDIO OUTPUT
BITSTREAM / PCM
OPTICAL
AUDIO OUT
VIDEO
OUT
COMPONENT VIDEO OUT
Wireless access point
Modem Cable
Modem Port
USB
Wireless LAN
Adapter
Wired
Network Test
Wireless