Filter
Top Products
20
Playback
Press the ON/STANDBY button.
The Blu-ray disc player turns on.
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
With the playback side
down
Press OPEN/CLOSE to close the disc tray.
Playback starts.
This section shows you the basics on how to play a disc.
CAUTION:
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Preparations
•Whenyouwanttoviewadisc,turnontheTVandselectthevideoinputconnectedtotheBlu-raydiscplayer.
Basic playback
If you insert a Blu-ray disc or a DVD that contains
a top menu, a menu may appear. Use
/ / /
to select the title you want to view, then press OK
to start playback.
•YoumayneedtopressthePOPUP/TOP MENU or
MENU button to display disc menu (depending on
the actual Blu-ray disc or DVD.)
1
2
3
4
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press the PLAY button.
•Thesoundismutedduringstillmode.
To stop playback
Press STOP. The setup menu is displayed.
To resume normal playback, press / to select DVD/BD-
ROM, then press OK.
•Dependingonthedisc,playbackstartswhereitstopped
or at the beginning of the disc.
If you press STOP twice, playback stops completely.
To stat playback again, press PLAY. Playback starts at
the beginning of the disc.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray opens
completely.
Be sure to press the OPEN/CLOSE button
to close the disc tray after you remove
the disc.
To turn the power off
Press ON/STANDBY button to turn the unit off.