Filter
Top Products
10
English
Connect USB device
A USB ash drive provides an additional
memory to software upgrade and enjoy
BD-Live
TM
bonus content.
You can also enjoy playing back MP3/
JPEG/MPEG4 les stored in the USB ash
drive.
1. Connect the USB ash drive to the USB
jack on this product.
Notes:
- To enjoy BD-Live™ bonus content, as your
local storage, use a 1 GB or larger USB
ash drive.
- For some Blu-ray
TM
discs with BD-Live
TM
feature,
you may need to plug in the USB ash drive
before loading the disc. Otherwise, the disc may
not playback.
- TOSHIBA does not guarantee 100%
compability with all USB ash drives.
Connect Power
1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
– Before connecng the AC power cord, ensure
you have completed all other connecons.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
– The type plate is located on the back of the unit.
4 Preparation
Always follow the instructions in this chapter
in sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiaon exposure or
other unsafe operaon.
Prepare the remote control
1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long me, remove the baery.
- Risk of explosion! Keep baery away from
heat, sunshine or re. Never discard baery in
re.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
7 m 10 m7 m
7 m 10 m7 m