Filter
Top Products
25
English
8 Troubleshooting
If you experience any of the following difculties while using this unit, check the list below
before consulting your nearest TOSHIBA dealer.
Problem Tip
No reaction to the
remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the battery correctly.
Insert new battery in the remote control.
No video signal on the
display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution.
Set TV System of TV correctly.
Incorrect or no audio /
video signal on the
amplier/display device
via HDMI cable.
If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.
Ensure the amplier/display devices setting match the Blu-ray
Disc™ player.
No high-denition video
signal on the TV.
Does the disc contain high-denition video? High-denition
video is not available when the disc does not contain it.
Does the TV support high-denition video? High-denition video
is not available when the TV does not support it.
No audio signal from the
loudspeakers of the
audio system.
Turn on the audio system.
Set the audio system to the correct external input.
Increase the volume level of the audio system.
Cannot play back a disc. Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
nalized.
Clean the disc.
Cannot play back JPEG
les from a disc.
Make sure that the disc was recorded in the JPEG/ISO format.
Cannot play MP3 les
from a disc.
Make sure that the disc was recorded in the ISO format.
Make sure that the bitrate of the MP3 les is between 8 and 320
kbps.
Make sure that the sample rate of the MP3 les is 32kHz,
44.1kHz or 48kHz.