Filter
Top Products
Recording
53
Recording a TV program
To stop recording
Press STOP to stop recording.
“
” will appear on the screen for about 4
seconds.
NOTE:
Recording does not stop instantly even if STOP is pressed during DVD
recording. Recording may continue for as long as 1 minute maximum.
To stop recording temporarily
Press PAUSE/STILL to avoid recording
unwanted material.
“
” will appear on screen for about 4 sec-
onds.
Press REC/OTR to resume recording.
NOTES:
• In DVD recording, the pause function will be released after 5 min-
utes to prevent damage. The unit will change to the STOP mode.
• When recording onto a video tape, you can select a recording chan-
nel in the recording pause mode. (You cannot change a recording
channel in the DVD recording pause mode.)
Recording one program while watching another
While the unit is recording, you can watch a different channel. Press
TV/VIDEO to switch to your TV tuner, then select a different channel
on your television.
NOTE:
Some CABLE hookups do not permit viewing one channel while re-
cording another. See pages 18 and 19.
VCR mode
DVD mode
NOTES:
• In DVD recording, the recording will
stop automatically if the DVD/VCR
cannot recognize a broadcasting
signal continues 30 minutes.
• If the disc space become full, the
recording is stopped and “No
space on the disc.” will appear on
the screen.
• In case of a power failure, the pro
gram cannot be recorded on the
disc during DVD recording.
When the power resumes, after the
DVD/VCR is turned on, the set
checks the disc to repair the error
which is caused by a power
failure. This checking process may
require about 1 minute depending
on disc condition.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
2H5-01 P53-59 7/25/05, 23:2153