Filter
Top Products
44 EN
4
Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
SP 2 : 00
Start End
- - : - -
Mode
SP
CH REC To
10 DVD
JAN/02
1 : 00AM
• You cannot make a program which recording
time exceeds 12 hours.
5
Use [K / L] to select channel number
or external input (L1 / L2), then press
[B].
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
DVD
JAN/02 2 : 00AM1 : 00AM
10
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
DVD
JAN/02 2 : 00AM1 : 00AM
L1
6
Use [K / L] to select a recording media
(“DVD” or “VCR”), then press [B].
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
JAN/02 2 : 00AM1 : 00AM
10
DVD
7
Use [K / L] to select a recording
mode.
Date
SP 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
10
DVD SP
Refer to “Recording Mode” on page 38 for DVD or
“Recording” on page 97 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date
SP 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
10
DVD SP
Auto recording mode select (DVD only) ...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
Date
Auto 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
10
DVD Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8
Press [ENTER] when all items are
entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer standby mode.
When Timer Set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the standby mode.
Timer Programming
THU JAN/01 11:00AMSP (1:00)
JAN/ 2/09 1:00 AM 125-01 SP
Date Start End CH
JAN/02 12:00AM 1:00AM 10
Your program setting will be stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 45.
9
Press [TIMER SET] to set a timer
programming.
Front panel display stays off while the unit is in
the standby mode.
TIMER RECORDING