Filter
Top Products
45
FP DISPLAY SETUP
1.
Highlight “FP DISPLAY SETUP” and press the
“ENTER” button.
2.
Use the “
Ÿ
” and “
ź
” buttons to choose between
“MODE” and “DISP BRIGHTNESS”.
3.
Under “MODE”, use the “
Ż
” and “
Ź
” buttons to
choose between “TIME” and “CHANNEL
NUMBER”. This will change the Front Panel
display information.
4.
Under “DISP BRIGHTNESS”, use the “
Ż
” and “
Ź
”
buttons to choose between “OFF”, “DIMMED” or
“FULL”. This will change the Front Panel display
brightness. In “OFF” state, the “ON/STANDBY”
LED indicator will light up in red colour.
Notes:
1. TIME mode sets the recorder’s front panel Time
and Channel Display to show current time. The
displayed current time is purely based on the
time sent by the broadcaster of the channel you
are currently viewing, which may not be accurate.
2. When the recorder is in off-air mode, CHANNEL
NUMBER sets the recorder’s front panel Time
and Channel Display to show the channel
number sent by the broadcaster.
INFORMATION
1.
Highlight “INFORMATION” and press the
“ENTER” button to check hardware and software
versions.
RECEIVING