Filter
Top Products
NOTICE
PREPARATION
INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
The normal MENU screen provides six menus after the initial screen for clock setting. Each MENU screen is shown below.
Press the DISPLAY button for a MENU screen. The menu is selected by pressing the SHIFT button. Then press the SET button to
proceed to the next screen. Use the SHIFT button and the SET button for settings and adjustments in the same manner. To return
to the initial screen press the DISPLAY button.
CONTENTS OF SCREEN DISPLAY
Monitor Screen (initial screen)
MENU Screen (initial screen)
CLOCK SET Screen
Comment
Setting of clock.
Unless the date-time is
adjusted, the “PROGRAM”
and “ALARM RECALL” will
not appear on the MENU
screen.
0:00:00 A 2
1/ 1/97 WED
SP
17:30:02 A 2
8/28/97 THU
SP
M E N U
CLOCK ADJUST
SETUPSETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
CLOCK ADJUST
MENU=[DISPLAY]
(MONTH) (DAY) (YEAR)
8 / 28 / '97
THU
17:30(TIME)
(DAYLIGHT
SAVING TIME) IN
Monitor Screen (normal screen)
MENU Screen (normal screen)
M E N U
CLOCK SET
SETUPSETUP
DISPLAY MODE
END=[DISPLAY]
TIME DATE SEARCH
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
SP
M E N U
CLOCK ADJUST
SETUPSETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
(TIME) ON
(SPEED) ON
(VCR) OFF
(ALARM) ON
(12H/24H) 24H
(CHAR.LINES) 6
DISPLAY
(DATE) ON
MENU=[DISPLAY]
(DAY OF THE WEEK) ON
DISPLAY Screen
SETUP Screen
CLOCK ADJUST Screen
Correction of date-time.
Setting of alarm recording
mode (recording time,
recording mode)
Setting of recording for
restoration of power following
a power failure.
Setting of operation after
detection of tape end (tape
end detection mode for tape
end detection during
recording and when an alarm
recording is made).
Setting of display screen
(date, day of week, time,
recording time, VCR number,
alarm).
Setting of time display (24H,
12H).
CLOCK SET
MENU=[DISPLAY]
(MONTH) (DAY) (YEAR)
1 / 1 / '97
WED
0:00(TIME)
(DAYLIGHT
SAVING TIME) OUT
13