Filter
Top Products
NOTICE
PREPARATION
INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
Each time the + SET button is pressed, the display
changes as follows.
→ STOP → CONT.
STOP ... Stops at tape end when any alarm condition has
occurred.
CONT .. Performs an operation selected by TAPE END
MODE on MENU SCREEN when tape end is
detected.
Setting the Alarm Recording
1
Press the DISPLAY
button.
3
Press the + SET button to set the alarm recording
time.
2
Press the SHIFT
button to blink SETUP
and press the + SET
button.
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
SP
Recording time
5 seconds recording
15 seconds recording
30 seconds recording
1 minute recording
1 minute and 30 seconds recording
2 minutes recording
2 minutes and 30 seconds recording
3 minutes recording
6 minutes recording
Recording to tape end
Recording during alarm input
Display
5S
15S
30S
1M00S
1M30S
2M00S
2M30S
3M00S
6M00S
CONT.
MANUAL
4
Press the SHIFT button to blink SPEED and press
the + SET button to set the recording time mode.
Each time the + SET button is pressed, the display
changes as follows.
SPA2 → A6 → SPA12 → A18 → SPA24 → SPA2
Each time the – SET button is pressed, the display
changes in the reverse order.
5
Press the SHIFT button to blink TAPE END ALARM
and press the + SET button to set operation after tape
end detection.
M E N U
CLOCK ADJUST
SETUPSETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
SP
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
SP
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
31
6
Press the DISPLAY
button twice to erase the
display.
17:30:02 A 2
8/28/97 THU
SP
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
Each time the + SET button is pressed, the display
changes as follows.
15S → 30S → 1M00S → 1M30S → 2M00S → 2M30S →
3M00S → 6M00S → CONT. → MANUAL → 5S → 15S
Each time the – SET button is pressed, the display
changes in the reverse direction.