Toshiba kV-9168A VCR User Manual


 
RECORDING
OPERATION
PREPARATION
INTRODUCTION
PLAYBACK
OPERATION
NOTICE
6
TAPE REMAIN button
The approximate time remaining on the tape is displayed
on the counter (in a 2 hour scale using a T-120 tape) while
this button is being pressed.
CASSETTE COMPARTMENT
Insert a cassette into this compartment to load the tape.
DISPLAY button
Press to display the MENU screen and change the
settings.
SHIFT / button
Press to select a desired menu on the screen.
TIME MODE / SET + – buttons
• Press either of the buttons to set the recording time
mode and playback time mode.
• Press either the + or the – button to set the mode and
the numerical value for each menu on the screen.
LOCATION SELECT button /
Press to change the position of superimposed characters
on the screen.
TRACKING buttons ( / )
Adjust to eliminate noise from playback picture.
PLAY button
Press to start the playback mode.
STOP button
Press to stop tape running.
PAUSE/STILL button
• Press during recording to pause recording.
• Press during playback for a still picture.
SHUTTLE dial
Turn this dial clockwise and hold:
• To fast forward the tape during the stop mode.
• To operate the forward picture search during the play-
back.
• To operate the forward slow play during the still mode.
Turn this dial counter clockwise and hold:
• To rewind the tape during the stop mode.
• To operate the reverse picture search during the play-
back.
• To operate the reverse slow play during the still mode.
PICTURE control
Adjust to soften or sharpen the picture during playback.